Checking Antenna Power Supply

Checking Antenna Power Supply







Unplug the connector.
- Remote control antenna, central locking system (456)












- Connect the lamp 86 11 857 to pin 3 of the female connector and a good grounding point.







- The test lamp should light.

Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead - I

YES - Checking the Antenna Ground Lead