Performing A Driving Cycle (Continued)

Performing A Driving Cycle (continued)












- Turn the ignition switch to the OFF position.

Plug in the connector:
- EVAP canister purge valve
- Drive the car between 60 and 100 km/h with constant accelerator depression.
- Read value: Multiplicative Adaptation (Trionic).
- Wait until the value changes. Another speed can then be selected immediately or come to a stop if desired. The engine must not be turned off however.
- The reading will eventually stabilize.
- State what the diagnostic tool shows:

-15% to +15% - Remedial Action OK

Other value - Fault Not Rectified - II