Checking Wiring Harness Between Control Module and the DC Motor

Checking The Wiring Harness Between The Control Module And The DC Motor







Unplug the connector:
- Motor backrest (357Dd)

Unplug the connector:
- PSM control module (357Dk)






















Take a resistance reading
- 1-Motor, backrest
- 22-PSM control module

The reading should be 0 Ohm - 1 Ohm

Checking the wiring harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead

YES - Checking the Other Lead - I