B1620

B1610 Control Module. Programmed With Wrong Configuration

B1620 Control Module. Not Programmed

Fault symptoms
Airbag warning lamp on.

Conditions
The following conditions are applicable to the respective diagnostic trouble codes:

B1610
- Control module wrongly configured.

B1620
- Control module is not configured.

Procedure
Check if there are other diagnostic trouble codes in the SRS, and use these for diagnosis.
If diagnostic trouble codes B1610 and B1620 persist, see Before changing a control module.
Before Changing A Control Module

Compare control module configuration, see Configuration of SRS control module.
If diagnostic trouble codes B1610 and B1620 persist, change the control module, see SRS control module.