Upholstery, Rear Seat

Upholstery, Rear Seat

To remove







1 Press out the sides of the long load opening to free the pins securing the armrest. Loosen one side at a time.
2 Put the armrest on a workbench.
3 Remove the upholstery by undoing the fastening at the back and pulling the upholstery from the armrest.
4 Remove the whole backrest and.







5 Place the backrest face down on a workbench.
40-percent part: Remove the lock brace and joint.
60-percent part: Remove the joint.
6 Detach the upholstery and padding from the bottom by lifting the fastening strip and removing the upholstery and padding.
7 Detach the upholstery by cutting the staples.

To fit


NOTE: Fit in reverse order. Fasten the upholstery to the padding with staples using the pliers supplied with the fitting kit,.