Resetting Activated Limp-Home Solenoid

1 Remove the engine cover.





2 Turn the ignition to ON.





3 Connect the diagnostic tool and contact Trionic. Clear diagnostic trouble codes.
4 Turn the ignition to OFF and wait 10 seconds.
5 Carefully push the end of the spring towards the throttle body.





6 Turn the black toothed disc anticlockwise, using a screwdriver. When it reaches the stop position a click will be heard.





7 Turn the pedal arm clockwise.
8 Check that the throttle arm does not follow the movement of the pedal arm.
9 Fit the engine cover.