Load Compensation

A/C
When DICE sends the information A/C ON out on the bus, the Trionic T7 uses the A/C pressure (Bus from DICE) to calculate the compressor's impending torque requirement. The value is convened into mg air/combustion and constitutes the mass air flow/combustion required to compensate fully for the compressor's torque requirement.





DICE sends continuous bus information "Current consumption (A)". The value is updated by DICE immediately before the electrically heated rear window or the radiator fan is connected or disconnected. Trionic T7 calculates the impending increase in generator load.

The value is convened to mg air/combustion and constitutes the mass air flow/combustion value required to fully compensate for the generator's load increase.