Trunk Light Bulb: Service and Repair

Rear Light Fitting In Boot Lid





To Remove

1. (RH side) Remove the handle.
2. Remove the trim on the side in question.





3. Loosen the lamp holder.
4. (RH side) Loosen the lock arm and remove the lock with gasket.
5. Unscrew the lamp retaining nuts.





To Fit

1. Fit the lamp and retaining screws.
2. (RH side) Fit the lock with gasket and the lock arm.
3. Fit the lamp holder.





4. (RH side) Fit the handle.
5. Fit the trim.





Replacement Of Lamp Bulb

1. (RH side) Remove the handle.
2. Remove the trim on the side in question.





3. Loosen the lamp holder.
4. Remove and change bulb.
5. Fit the bulb holder.
6. (RH side) Fit the handle.
7. Fit the trim.