Checking Speed Data From the ABS

Checking Speed Data From The ABS





Unplug the connector.
^ H43-1.
^ Extract pin 16 from the male half of the connector.





^ Plug in the connector.









^ Connect a test lamp to B+ and pin 16.





^ Raise the rear end of the car.





^ Turn the ignition switch to the ON position.





^ Rotate the LH rear wheel.





^ The test lamp should flash.

Is the function correct?

NO ^ Continue with Checking Speed Data From The ABS.

YES ^ Check, Speed Signal





Check the lead and repair or replace it as necessary.

After performing this procedure Final Check