Electronic Unit

To remove





1 Remove the main instrument unit.
2 Undo the eight screws securing the covers over the back section. Note the locations of the four long screws and the four short screws.
3 Release the retainer (two clips) for the back section cover and remove the cover.
4 Unplug the connector and the three contact foils.





5 Remove the electronic unit.

To fit





1 Fit the electronic unit.
2 Plug in the foils and the connector

NOTE: Make sure no cables are pinched.

3 Fit the electronic unit.





4 Fit the cover over the electronic unit, eight screws.
5 Fit the main instrument unit