Upholstery, Rear Seat - II

To remove







1 Remove the seat cushion from the car.
2 Release the upholstery strips along the edge and lift the rear steel plate to one side.
3 Cut the staples securing the seat upholstery to the foam cushion.







4 Remove the seat upholstery.

To fit







1 Fit the upholstery to the seat cushion.
2 Fit the staples using the pliers in fitting kit 84 71 O62.
3 Roll the upholstery over the foam cushion.
4 Turn the cushion over and position the rear plate.
5 Fit the upholstery strips along the edge.







6 Pull the locking straps through the upholstery.
7 Replace the seat cushion in the car.