Height Adjustment, Manual Seat

Height Adjustment, Manual Seat

To remove

1. Remove the front seat from the car.
2. Remove the height adjustment lever and backrest adjustment knob.





3. Raise the seat to its maximum height.
4. Remove the upper seat cowl, 2 covers and 3 screws.

Electrically adjustable seat: There is a protective cap on the tip of the front screw. Keep this cap safe and refit it to the screw to prevent damage to the electrical cables.

Bend up the rear edge of the cowl and pull it forwards.

5. Remove the height adjustment mechanism, 4 screws.





To fit

NOTE: To assist fitting, the seat can be pressed down when the height adjustment mechanism is inserted.

Fit in reverse order.
Fit the front seat.

IMPORTANT: Electrically adjustable seat: Fit the protection on the front bolt.