Fan Motor, Seat Replacement

Fan motor, seat

To remove






1 Raise the front seat and remove from car, refer to "Front Seat Replacement". [1][2]Procedures
2 Remove the PSM control module from the console, 2 screws.
3 Remove the console for the PSM control module by cutting the cable tie.
Remove the 29-pin connector from the console.
4 Unplug the connector and cut the cable tie.






5 Remove the 2 nuts holding the fan motor.
6 Unplug the connector to the fan motor and cut the cable tie.
Lift out the motor.

To fit






1 Refit the fan motor, 2 nuts.
2 Plug in the connector for the fan motor and fasten the wires with a cable tie
3 Refit the 29-pin connector on the console and reattach the console with a cable tie.






4 Plug in the connector and secure the wires with a cable tie.
5 Screw the PSM control module to the console, 2 screws.
6 Replace the front seat.