Luggage Compartment Trim, Side Trim, 5D

To remove







1 Lift off the cover over the storage compartment and lift out the storage box.
2 Remove the scuff plate, 2 covers, screws and clips.
3 Detach the rear edge of the roof covering so that clearance for the D pillar trim is obtained.







4 Remove the D pillar trim, fastened with clips.
5 Remove the parcel shelf support, 1 cover and 3 screws.
6 Remove the side bolster by pulling it at the top so that the locking tongue releases and then unhook it at the bottom.







7 Remove the 5 screws securing the top of the side trim.







8 Fold out the side trim and unplug the connector for the CD player, if fitted. Lift out the side trim.

To fit







1 Lift the side trim into place.
Plug in the connector for the CD player, if fitted.
2 Fit the screws securing the top of the side trim, starting with the rearmost screw so that the trim will be properly located.
3 Fit the side bolster by hooking the lower edge into place and then pressing home the upper locking tongue.







4 Fit the parcel shelf support, 3 screws and 1 cover.







5 Fit the D pillar trim, secured with clips. Press the rear roof covering into place.
Adjust the weatherstrip over the edges of the D pillar trim and roof covering.
6 Fit the scuff plate, clips, 2 covers and screws. Adjust the position of the weatherstrip over the scuff plate.







7 Lift the storage box into place and fit the cover.