Antenna, Phone: Service and Repair

Aerial Cable, Mobile Phone

To remove
1 Remove the mobile phone aerial from the roof.
2 Remove the front right speaker grille from the dashboard.
3 Remove the A pillar trim (right/left side) and C pillar trim (right/left side).
4 Remove the headlining (rest it on the head restraints).
5 Remove the glove box (for RHD, remove lower panel).
6 Detach the aerial cable from the body (note cable routing).
7 Cut off the old aerial cable as close to the speaker as possible.

To fit
1 Mount the mobile phone aerial on the roof.
2 Attach the aerial cable to the body, routing it the same as the old cable.
3 Run the aerial cable down between the speaker and the A pillar.
4 Remove the carpet from the centre console (fold down).
5 Place the aerial cable under the carpet.
6 Detach the telephone console and disconnect the old aerial cable.
7 Connect the new aerial cable, refit telephone console.
8 Carry out a function check.
9 Cut off the old aerial cable.
10 Secure the cable to prevent rattles.
11 Refit the carpet on the centre console.
12 Replace glove box.
13 Replace headlining.