Antenna Amplifier: Service and Repair

Aerial Amplifier

To remove
1 Remove the speaker grille on the right-hand side of the parcel shelf.
2 Remove the sealing strip.
3 Remove the trim on the right-hand C pillar to gain access to the aerial amplifier.
4 Undo all connections to the aerial amplifier.
5 Remove the screws holding the aerial amplifier and remove the unit.

Important
Take care with the contact (4). When undoing the Fuba GO-NOGO HF contact, care is required to ensure that it is done correctly without damaging the connection. See description (4).

To fit
Fit in reverse order.