Resetting Triggered Limp-Home Solenoid

1 Remove the engine cover.





2 Put the ignition in ON position.





3 Connect the diagnostic tool and contact Trionic. Clear the diagnostic trouble codes.
4 Put the ignition in the OFF position and wait 10 s. Remove the cover over the throttle body.
5 Carefully push the end of the spring towards the throttle body





6 Rotate the black tooth disc anti-clockwise with a screwdriver. A click will be heard in its end position.





7 Rotate the pedal arm clockwise.
8 Make sure the throttle arm does not follow with the pedal arm when it is rotated.
9 Fit the cover to the throttle body.