DICE

DICE (Dashboard Integrated Central Electronics):

Diagram

LEGEND
1. Radiator fan system
- Two speed
- Two fans
2. Headlamps
3. Fog lights
4. Air conditioning, A/C
5. Headlamp wipers
6. Lighting for buttons and controls
7. Interior lighting and reading lamps
8. Rear fog lights
9. Manual Climate Control (MCC)
10. Trailer connector
- 4D
- 5D
11. Reversing lights
- Manual gearbox
- Automatic transmission
12. Glove box lighting
13. Electrically heated rear window and door mirrors
14. Windscreen wipers
15. Luggage compartment lighting
16. Direction indicators, hazard flashers
- 4D, US/CA markets
- 4D, other markets
- 5D, US/CA markets
- 5D, other markets
17. Rear window wiper 5D

No. Name / Location
22a Main fuse board, dashboard / on end of dashboard next to driver's door
445 Data link connector, 16-pin, CARB / under dashboard by steering column
628 DICE control module
- LHD: above the dashboard relay box
- RHD: behind the dashboard relay box

16-pin connectors
H16-5 Under dashboard by steering column

Crimp connections
J42
LHD: Approx. 100 mm from branching point of grounding point G40 towards main relay board
RHD: Approx. 50 mm from branching of grounding point G42 towards relay box

J58
LHD: Approx. 50 mm from the MIU branching point (12-pin connector) towards the data link connector.
RHD: Approx. 100 mm from the SID branching point towards the radio.

J60
LHD: Approx. 30 mm from the branching point of the DICE control module towards the main fuse box.
RHD: Approx. 20 mm from branching point of the DICE control module towards the engine bay grommet

J62
LHD: Approx. 100 mm from the branching point of the floor lighting (front, left) towards the steering wheel switches.
RHD: Approx. 50 mm from the branching point of the data link connector towards the steering wheel changeover switches.

J66
LHD: Approx. 60 mm from the branching point of the floor lighting (front, left) towards the DICE control module.
RHD: Approx. 100 mm from the MIU branching point (20-pin connector) towards the DICE control module.

J140
LHD: Approx. 340 mm from the branching point of grounding point G40 towards the DICE control module.
RHD: Approx. 190 mm from the branching point of the DICE control module towards the fuse box.

Grounding points
G30 - In the engine bay on the side section in front of the lefthand wheel housing.
G40 - In the interior on the left-hand side of the knee member.
G42 - In the interior on the right-hand side of the knee member.