Rear Belts

Rear Belts

To remove





1. Remove the C-pillar trim (fastened with clips).
2. Undo the bottom seat-belt mounting and remove the belt guide form the C-pillar trim.
Draw the belt through the C-pillar trim.

3. Remove the upper belt mounting from the C-pillar, 2 nuts.

To fit

IMPORTANT:
^ Ensure that the belt runs correctly.
^ Check that the door seals fit correctly.

Fit in reverse order.

Tightening torques:
Inertia reel mounting nuts 45 Nm (33 ft. lbs.).
Floor mounting 45 Nm (33 ft. lbs.).