Air Recirculation Motor

Air Recirculation Motor

To remove





1. Remove the glove compartment.
Remove the trim from the side of the center console.

2. Remove the air recirculation motor, 2 bolts.





3. Unplug the connector.
4. Cut the cable tie holding the wiring harness.
5. Remove the connector from the plate.

To Fit





1. Fit the air recirculation motor.
2. Refit the connector in the plate.





3. Fasten the wiring harness with a cable tie.
4. Connect the contact.
5. Refit the side trim.





Fit the glove box.