Shift Solenoid: Service and Repair

Solenoid

To Remove

Important: Solenoid ST, which controls system pressure, must not be removed!

1. Remove the valve housing cover, see -> .





2. Unplug the relevant solenoid's connector.
3. Remove the solenoid's retaining bolt.
4. Pry the solenoid loose, using a screwdriver.

To Fit





1. Position the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 ft. lbs.).
2. Plug in the solenoid's connector.
3. Fit the valve housing cover, see ->.