Replacement Exc Viggen

To remove
1. Open the expansion tank pressure cap and release the overpressure, then tighten the pressure cap.
2. Remove the cover and delivery pipe between the charge air cooler and throttle body (turbo).





3. Unplug the temperature sensor connector and remove the sensor.

To fit





1. Fit the temperature sensor.
Tightening torque: 6 Nm (4.5 ft. lbs.) Plug in the connector.
2. Fit the delivery pipe between the charge air cooler and throttle body (turbo).
3. Fill up with coolant and check the system for leaks.