Front Door Window Glass Weatherstrip: Adjustments

Adjusting The Front Side Window Interior Moulding, 3D, CV

Adjustment

1. Push down the moulding to the correction position. Remove the door panel.







2. Lower the side window.

IMPORTANT: Protect the side window when drilling by placing a putty knife or similar tool between the interior side window moulding and the side window.

3. Drill a 2 mm hole about 10 mm (3D) or about 55 mm (CV) from the rear of the interior window moulding.
Drill through the moulding and the metal flange.

4. Screw on the moulding.
5. Fit the door trim.