Rattling Noise From the Lid Over the Rotating Cover Torsion Cables

Rattling Noise From The Lid Over The Rotating Cover Torsion Cables

Fault symptoms
Rattling noise from the lid over the rotating cover torsion cables

Cause: Play between the cover and soft top cover ribs.

Procedure
Fit Nitto seal, part no. 48 55 656

1. Manoeuvre the soft top so that the soft top cover is open.
2. Cut the seal into 4 sections.
3. Insert the seal into the gap between the cover and soft top cover rib.







4. Check that the noise no longer occurs.

Fault diagnosis procedure is not available.