Rattle From the Covering of the Soft Top Cover

Rattle From The Covering Of The Soft Top Cover

Fault symptoms
Rattle from the covering of the soft top cover.

Cause: Covering is loose.

Procedure
Fit felt tape, part no. 49 60 555.

1. Run the soft top so that the soft top cover is in its upright position.
2. Check where the covering hits against the soft top cover.







3. Fit a few pieces of felt tape on the edges of the covering where the covering hits against the soft top cover ribs.







4. Check that the noise is gone.

Fault diagnosis procedure is not available.