Noise From 2nd Bow When Driving

Noise From 2nd Bow When Driving

Fault symptoms
Noise from 2nd bow when driving

Cars concerned: -37001073

Procedure
If the rubber lug is loose, adhere with Loctite 406.If the rubber lug is missing, replace the mounting, part no. 51 12 206.

1. Manoeuvre the soft top until it is half-open. Use 82 93 144 Holder, hydraulic soft top.
2. Check that the rubber lug is properly attached.
3. If the lug is loose, grind the adhesion surface and wipe clean. Adhere the lug with Loctite 406.







4. If the rubber lug is missing, replace the mounting.

Fault diagnosis procedure is not available.