Rear Seat Belt

Removing
1 Remove the rear side upholstery.
2 Remove the bolt securing the seat belt to the floor.







3 Remove the bolt securing the strap guide.
4 Remove the clip securing the upholstery above the long-load opening.







5 Remove the clips securing the upholstery below the long-load opening.
6 Move aside the upholstery and remove the bolt securing the seat belt roller.
7 Remove the seat belt.

Fitting







1 Fit the seat belt roller and tighten the bolt.
Tightening torque: 45 Nm (33.3 lbf ft)
2 Fit the upholstery and fasten the clips securing it below the long-load opening.







3 Fasten the clips securing the upholstery above the long-load opening.
4 Fit the strap guide and tighten the bolt.
Tightening torque: 45 Nm (33.3 lbf ft)
5 Tighten the bolt securing the seat belt to the floor.
Tightening torque: 45 Nm (33.3 lbf ft)