Bumpers, Scoring and Scuffs

Bumpers, Scoring And Scuffs







1. Wash the component with Teroson FL cleaner.
2. Grind the damaged area with a low-speed tool and abrasive paper 80-120. Continue with abrasive paper 180-200.







3. Grind the edges with abrasive paper 240 - 320.







4. If there are deep indentations, "round off" the edges with abrasive paper.
5. Mask off the surface surrounding the damage.







6. Spray with Terokal primer 150. Allow to dry for 10 - 15 minutes or until the surface has become totally mat.
7. Fill with Terokal 9225. Allow to dry for two hours.







8. Grind with a low-speed machine, 180 paper. Continue with paper 240 and then 320. Finally, grind with 500 paper.
9. Apply a thin layer of Terokal primer 150. If there are any pores or small scratches, they can be filled with Standox Stando-soft-feinplastic with a maximum thickness of 1 mm.
10. Paint according to the paint manufacturer's recommendations.