Before Changing A Control Module

Experience has shown that the majority of control modules returned for warranty repairs are in perfect working order. In these cases, changing the control module has obviously not cured the fault. Check the following points before changing the control module:
1 Check all grounding points and the power supply for the control module.
2 Using the diagnostic tool, check that all readings are reasonable (several readings can affect a function).
3 Using the diagnostic tool, check that all activations are functioning. (A fault in one output circuit can affect another output circuit).
4 If the fault persists, the control module must be replaced.
5 When handling the control module, it is important to ground yourself by touching the engine for example. Avoid touching the pins of the control module.


WARNING
If possible, carry out the "divorce" before replacing the control module. "Marry" the main unit to the car once it has been replaced.
Replacement of Audio System