Camshaft, Engine

DIMENSIONS
General Data:
Number Of Bearings 5
Bearing Diameter 28.922-28.935 mm (1.1395-1.1407 inch)
End Play 0.080-0.350 mm (0.0032-0.01397)
Cam Lift:
Inlet Valves 8.650 mm (0.3408 inch)
Exhaust Valves 8.650 mm (0.3408 inch)
Valve Timing:
Inlet Opens 14° Before Top Dead Center (BTDC)
Inlet Closes 46° After Bottom Dead Center (ABDC)
Exhaust Opens 44° Before Bottom Dead Center (BBDC)
Exhaust Closes 16° After top Dead Center (ATDC)


TIGHTENING SPECIFICATIONS
Cam Bearing Caps 15 Nm (11 ft. lbs.)
Cam Sprocket Bolts 63 Nm (47 ft. lbs.)