Reservoir

REMOVAL
1. Open the drain plug and drain out the coolant. Remove the lid of the expansion tank to speed up the draining.
2. Undo the upper radiator hoses from the expansion tank.
3. Disconnect the level sensor's electrical connection.
4. Remove the screw securing the expansion tank.
5. Lift up the expansion tank and undo the lower radiator hose.

INSTALLATION
1. Install the lower radiator hose to the expansion tank and position the expansion tank.
2. Install the screw securing the expansion tank and reconnect the level sensor's electrical connection (certain models).
3. Connect the upper radiator hoses.
4. Check that the radiator's drain plug is tightened, fill up with coolant and check that the system does not leak.