Self-Arming

The anti-theft alarm can be programmed for self-arming. This means that the alarm automatically starts monitoring without the remote control being used. How the function is to become active and the time elapsing before it becomes active are specified.

When the alarm has been triggered, the selected country code will apply. The LED will start its delay period according to the specified "TIME BEFORE ACTIVE." and then go over to indicating that the alarm is armed.

Programming
Self-arming
Connect an ISAT scan tool.
Select "PROGRAMMING".
Select "SELF-ARMING" and then:
1 "OFF" in order to deselect self-arming.
2 "AT +15 OFF" to select the self-arming function to be connected when the ignition is "OFF".
3 "+15 OFF DOOR CLOSED" for connection of the self-arming function when the ignition is "OFF" and the driver's door closed.

Time before self-arming
1 Select "TIME BEFORE ACTIVE.".
2 Select time: 30, 60, 90, 120, 150, 180, 210, 240, 270 or 300 seconds as the time before the alarm self-arms.