Panic Alarm

The theft alarm has a programmable "panic function". This means that the alarm can be quickly set off using only the remote control if for instance an attempted break-in is discovered.
- The alarm is set off if the left-hand button on the remote control is held depressed for at least 2.25 sec.
- The alarm is according to the country code selected.
- Press the LH button again to switch off the panic alarm.

Programming
Connect the Intelligent Saab Tester (ISAT) scan tool.
Select "ADJUSTING"
Select "PANIC ALARM" and then:
1 "OFF" if the function is not to be included.
2 "ON" if the function is to be included.