Power Supply (+30 Circuit)

Positive current is supplied directly from battery 1 to the following components:
^ Starter motor 4 and then generator 2
^ Maxi fuse holder 501
- Maxi fuses 1-5

Positive current is supplied from the battery via crimped connection J3 to the following components:
^ Main fuse board 342A
- Fuses 1-5
- Maxi fuses 1-4
^ Lighting relay 8
^ Main and dipped beam relay 8A

Current is supplied to the following components via maxi fuse 1 in maxi fuse holder 501 and crimped connection J89:
^ Main fuse board 22A
- Fuses 1, 4, 13, 23, 25, 33 and 34

Current is supplied to the following components via maxi fuse 2 in maxi fuse holder 501 and crimped connection J2:
^ Main fuse board 22A
- Fuses 2, 5, 10, 12, 16, 27, 28, 35
^ Starter relay 517
^ Lights switch 10
^ Crimped connection 89, which then supplies
- Fuses 2, 12, 28 in fuse holder 22A
- Fuel pump relay 102
- Fuel injection relay 229
^ Crimp connector H4-12 which then supplies
- Fuses 5, 10, 16 in main fuse board 22A

Current is supplied via maxi fuse 3 in maxi fuse holder 501 to the following component:
^ Ignition switch 20

Current is supplied via maxi fuse 4 in maxi fuse holder 501 to the following components:
^ Ignition switch relay 21

Current is supplied via maxi fuse 5 in maxi fuse holder 501 to the following components:
^ Top stack actuation system control module 547