Turn Signals: Testing and Inspection
FAULTS DIAGNOSIS HINTSDIRECTION INDICATORS
The car's direction indicators are operative only when the ignition switch is in the Drive position.
1 Check that fuse 22 is intact and supplied with current.
2 Check that current is present on pin 3 of the direction indicator stalk switch.
3 Check that the light bulbs are OK and supplied with current.
4 Check the connectors, wiring harness and ground connections.
HAZARD FLASHERS
The car's hazard flashers are always supplied with current via pin 21 of the Integrated Central Electronics (ICE) control module.
1 Check that fuse 2 is intact and supplied with current.
2 Check that current is present on pin 24 of the ICE control module.
3 Check that the light bulbs are OK and supplied with current.
4 Check connectors, wiring and ground connections.