Parking Lamp: Testing and Inspection

FAULT DIAGNOSIS HINTS
The parking lights are switched on by turning lights switch 10 to drive position 1.
1. Check that fuses 29 and 30 are intact and supplied with current.
2. Check that the light bulbs are OK and supplied with current.
3. Check the connectors, wiring harness and ground connections.

IMPORTANT: When changing any light bulb, always make sure that it is of the correct rating. If it is not, the integrated central electronics control module will sense an imbalance in the circuit and the "DEFECTIVE LAMP" or "INFO DISPL" indicator lamp in the main instrument display panel will light up.