Headlamps

FAULT DIAGNOSIS HINTS
The headlamps will be switched ON when ignition switch 20 is in position X and lights switch 10 in position 2.
1. Check that fuses 8 and 9 (main beam) and 6 and 7 (dipped beam) are intact and supplied with current.
2. Check fuse 27 if the headlamp flasher does not work.
3. Check that the bulbs are OK and supplied with current.
4. Check the grounding of each lamp.
5. Check connectors, wiring and ground connections.

IMPORTANT:
When fitting a replacement bulb, always make sure that it is of the correct rating.

If it is not, the "DEFECTIVE LAMP" or "INFO DISPL" lamp in the main instrument display panel will light up due to imbalance in the filament monitor.

The car's wiring and headlamp reflectors are not designed for higher ratings.