Checking Lock Washers

SUBJECT # 11:
CHECKING LOCK WASHERS FOR BRITTLENESS

APPLICATION:
VIN SERIAL NOS. S7000216-S7002732

Check the lock washers located at the main potentiometer for brittleness.

Parts:

Lock washer (as necessary) 45 56 098




1. Operate the top using the "ROOF" switch until it is in the position shown above. The top. 5th bow and Tonneau cover should be fully raised.

2. Lightly tap the lock washer located by the main potentiometer with a screwdriver to check for brittleness.

3. Change any lock washers that show signs of cracking.