3:2 Electrical System. Wiring Diagrams

Page 24 Fuses and relays

Electrical distribution box, engine compartment

"maxi 1" should be 30 A, "maxi 2" should be 60 A.

Page 25 Fuses and relays

Electrical distribution box, engine compartment

"Location A..." should be "Location A 8 Lighting relay",
"Location B..." should be "Location B 8A Head lamp main and dipped beams".
"Location G" should be "G1 Horn (mini-relay)" and "G2 Secondary air injection control valve (mini-relay)". "Location H2 Maxifuse 30 A Secondary air injection pump" should be inserted.

Page 26 Fuses and relays

Electrical distribution box, engine compartment

"No. 1(60 A)", delete fuse 17,
"No. 2 (60 A)", delete fuse 33.

Page 164 Main instruments

In the wiring diagram for Main instrument 1, component 110 should be 111.
The cables between connector H33-3 and main instrument display panel 540A are transposed. The cable from pin 13 of connector H33-3 should be connected to pin 6 of the main instrument display panel (540A) and the cable from pin 14 of connector H33-3 should be connected to pin 1 of the main instrument display panel (540A).

Page 165 Main Instruments

In the wiring diagram for Main instrument 2, components 110 and 111 should change places. 110 should be at pin 5 and 111 should be at pin 6.

Page 198 Air conditioning, A/C




Component 169 has the wrong symbol. It should be a "snowflake", Figure 8.

Pin 38 in component 505 should be pin 44.

Pages 236 and 237 Central locking

Pin 4 in component 175 should be pin 9.

Page 276 ABS Anti-lock brake system, ABS




540A and 540B: The graphic symbols in the main instrument display panel should change places but the pin numbers are OK. Change 110 to 111 in 540A and 540B. Refer to Figure 9.

Fuse holder 22A should be 342A, fuse 22 should be maxi 2.