Front Assembly - Technical Data Corrections

CATEGORY
Steering

SECTION
6

ISSUE
03/97-0740

PAGE
9

CODE
631

Subject:
Amendments to Service Manual
Section 6 Front assembly & steering

Application: 1994-900





Some of the dimensions relating to the front assembly have been changed. See the Table.

Front wheel alignment (unladen car)

Make sure you record these important changes on page 025-1 of Service Manual Section 6 Front assembly & steering. This information should also be recorded in Service manual Section 0:2 Technical Data, page 144.

The Wear Limits Table in the Technical Data section should be depleted and replaced with:

Important
No free play should be visible when the front assembly is relieved of load.