Replacement of Dash Board Wiring

1 Remove the switches in the dashboard and mark the connectors.
2 Remove the dashboard. The dashboard wiring will then be accessible.
3 Carefully mark all connectors before unplugging them from the components.
4 Install the new wiring. Check the cable codes and color coding of the connectors carefully against the wiring diagrams.


NOTE: Fix the wiring properly so that no knocking, rattling or other unwanted noise occurs when the car is being driven.


Switches in dashboard Color of connector
Light switch Black
Beam length switch Orange
Fog lights Green
Rear fog light Black
Rheostat White
Windshield wiper switch Grey
Heated driver's seat Green
TCS OFF Black
Heated passenger's seat Yellow
Hazard flashers Green