Parking Lamp: Testing and Inspection

FAULT DIAGNOSIS
The parking lights are switched on by turning lights switch 10 to drive position 1.
1. Check that fuses 29 and 30 are intact and supplied with current.
2. Check that the bulbs are intact and supplied with current.
3. Check the connectors, wiring harness and ground connections.

IMPORTANT: Whenever it is necessary to change any of the bulbs, always install a bulb of the correct rating. The ICE control module may otherwise sense a state of imbalance and the "DEFECTIVE LAMP" indicator lamp or INFO DISPL lamp will light up in the main instrument display panel.