Hazard Warning Lamps: Testing and Inspection

FAULT DIAGNOSIS HINTS
Direction indicators
The car's direction indicators are operative only when the ignition switch is in the Drive position.
1 Check that fuse 33 is intact and supplied with current.
2 Check that current is present on pin 3 of the direction indicator stalk switch.
3 Check that the bulbs are OK and supplied with current.
4 Check the connectors, wiring harness and ground connections.

Hazard flashers
The car's hazard flashers are always supplied with current via pin 21 of the ICE control module.
1. Check that fuse 2 is intact and supplied with current.
2. Check that current is present on pin 24 of the ICE control module.
3. Check that the bulbs are OK and supplied with current.
4. Check connectors, wiring and ground connections.