Evaporator Core: Locations

Location
The evaporator is located in the climate control unit.

Design
The design of the evaporator depends on whether the car is equipped with a four-cylinder or V6 engine and whether it is left-hand drive or right-hand drive.
1 LHD 4-cylinder. The expansion valve is situated in the engine bay. The evaporator's pipes must be cut off before the evaporator is taken out of the climate control unit.
2 LHD V6. The expansion valve is situated in the climate control unit.
3 RHD. The expansion valve is situated in the engine bay.
4 As a spare for LHD cars we supply the evaporator in a V6 design with a block so that the pipes can be joined to the lead-through in the bulkhead partition.
5 In cars with RHD the spare evaporator is supplied with the same block in RHD design.