Activate Functions

CAUTION:
- The activate functions should always be used with discretion.
- Activation of throttle closing results in a severe reduction of engine torque.
- Activation of "disconnect full-load enrichment" causes the engine to stop.
- Always deactivate an activated function before proceeding further in the ISAT (scan tool) menu.
- When the work is finished, always clear any diagnostic trouble codes that may have been generated in the MOTRONIC or Traction Control Module (TCM) systems.

NOTE:
- When a system function is activated with the ISAT (scan tool), it signifies that the TCS control module does something that is not normal from a functional viewpoint.
- Consequently, diagnostic trouble codes may be generated in other systems that are dependent on the TCS system.
- On activation of throttle closing, for instance, an improbable TCS throttle position signal is sent to the automatic transmissions TOM control module.
Similarly, on activation of "disconnect full- load enrichment" an improbable signal is sent at an improbable time to the MOTRONIC control module.