Replacement of Rear Door Lock

Replacement of rear door locks





To remove
1 Open the door.
2 Remove the door trim. Service and Repair
3 Remove the water barrier.
4 Detach the pull bar (between inside handle and lock) from the lock.
5 Detach the pull bar (between lock button and lock) from the lock.
6 Remove the rear guide channel retaining screw.
7 Remove the three screws securing the lock.
8 Remove the complete lock.
9 Unplug the connector for the central locking system motor.
10 Remove the central locking system motor from the lock.


To fit.
Fit in reverse order.