Windshield Washer Spray Nozzle: Service and Repair

Removing And Installing Spray Nozzle

Removing spray nozzle
1. Open the bonnet.
2. Switch off ignition and remove ignition key.
3. Disengage cover -arrow A-, disconnect the electrical plug connection -arrow B- and pull the hose connection -arrow C- apart.







4. Pull the spray nozzle downwards -arrow A- and remove from the bonnet -arrow B- along with the connections.







Installing spray nozzle
1. Insert spray nozzle along with the lines under the bonnet -arrow A- and engage -arrow B-.







2. Insert the lines through the opening, connect electrical plug connection -arrow B- and connect the water feed line -arrow A-. Position the cover -arrow C- under the bonnet.







Adjusting spray nozzles

ATTENTION:
Risk of damage to spray nozzles.
- Sharp objects must not be inserted in the nozzle hole.

NOTE:
- The angle of the spray nozzle can be adjusted without the use of a tool, i.e. it can be adjusted by hand.
- The recommended spraying range is in the central position.
- Risk of damage to spray nozzles.

1. Close the bonnet.
2. Adjust the spray height -arrow-.