Underhood Light Bulb: Service and Repair

Removing And Installing Bulb For Engine Compartment Light

Information







Removing bulb for engine compartment light
1. Switch off ignition and remove ignition key.
2. Use a plastic spatula or screwdriver to lever out the light cover for the engine compartment light -D-.







3. Pull out light, press on plug -a- and remove it.







4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.







5. Pull bulb out of holder.







Installing bulb for engine compartment light
1. Insert bulb fully into holder.







2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.







3. Push in plug until it is felt to engage.







4. Insert light into opening and press into place. Ensure light is fitted properly.