Glove Box Lamp: Service and Repair

Removing And Installing Bulb For Glove Compartment Light

Information







Removing bulb for glove compartment light
1. Switch off ignition and remove ignition key.
2. Use a plastic spatula or screwdriver to prise out the light.







3. Pull out light, press on plug -arrows a- and remove it.







4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.







5. Pull bulb out of holder.







Installing bulb for glove compartment light
1. Insert bulb into holder.







2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.







3. Push in plug until it is felt to engage.







4. Insert light into opening and press into place. Ensure light is fitted properly.