Rear Suspension
| Spring Strut To Body | Turbo | M10 | 46 |
| GT2 | M10 / 10 | ***46 *** GT2 with roll-over bar: Carry out a test drive after performing assembly work on the roll-over bar / spring support on the body and then retighten the M10 fastening nuts (three per side) to the same torque! | |
| Spring Strut To Wheel Carrier | M12 X 1.5 | 110 | |
| Shock Absorber To Mount (piston Rod) | Turbo | M12 X 1.5 | 58 |
| GT2 | M12 x 1.5 | 60 | |
| Stabilizer Mating Bearing To Spring Strut (lock nut) | GT2 | M52 x 1.5 | 50 |
| Height Adjustment On Spring Strut (lock nut) | GT2 | M52 x 1.5 | 50 |